Control Output; Control Output Operation Mode Settings - Autonics TM Series User Manual

6.2

Control Output

6.2.1

Control Output Operation Mode Settings




6.2.1.1 Heating Control
Heating control mode: the output will be provided in order to supply power to the load
(heater) if PV (Present Value) falls below SV (Setting Value).
6.2.1.2 Cooling Control
Cooling control mode: the output will be provided in order to supply power to the load
(cooler) if PV (Present Value) rises above SV (Setting Value).
© Copyright Reserved Autonics Co., Ltd.
Control output modes for general temperature control include heating, cooling, and
heating and cooling.
Heating control and cooling control are mutually opposing operations with inverse
outputs.
The PID time constant varies based on the controlled objects during PID control.
Group
Initial Setting Group
Parameter
Heating, Cooling
Operating Type
Heating and Cooling
6 Parameter Settings and Functions
Factory
Range
Default
Heating
Unit
-
49