Specifications; Ratings; Input Type - Autonics TK4S User Manual

2

Specifications

2.1

Ratings

Series
Power Supply
Allowable voltage range
Power Consumption
Display
PV(W x H)
Character
Size
SV(W x H)
RTD
Input
Thermocouples
Types
Analog
RTD
Thermocouples
Display
Accuracy
Analog
C.T. Input
Relay
Control
SSR
Output
Current
Alarm Output
Transmission
Output
Output
Option
Communication
C.T.
Input
Option
Digital Input
Heating and
Cooling
Control
Type
Heating or
Cooling
© Copyright Reserved Autonics Co., Ltd.
TK4S TK4SP
7-Segment (red), all other displays (green, amber, red LED)
7.0X14.0mm 7.0X14.0mm
5.0X10.0mm 5.0X10.0mm
JPT 100 Ω, DPT 100 Ω, DPT 50 Ω, CU 100 Ω, CU 50 Ω, and Nikel 120 Ω
(6 types)
K, J, E, T, L, N, U, R, S, B, C, G, and PLII (13 types)
Voltage: 0 to 100mV, 0 to 5V, 1 to 5V, and 0 to 10 V (4 types)
Current: 0 to 20mA and 4 to 20mA (2 types)
※ 1
At room temperature (23℃ ± 5℃): PV ± 0.3% or ± 1℃ (whichever is greater) ± 1 digit.
At all other temperature ranges: PV ± 0.5% or ± 2℃ (whichever is greater) ± 1 digit.
In case of TK4SP series,
At room temperature (23℃ ± 5℃): ± 0.3% F.S. ± 1 digit.
At all other temperature ranges: ± 0.5% F.S. ± 1 digit.
Choose between DC0 to 20 mA and DC4 to 20 mA (Load 500 Ω Max.)
250 VAC 3A 1a 2Contacts(TK4SP-1contact)
DC4 to 20mA (Load 500 Ω Max. Output Accuracy: ±0.3% F.S)
RS485 Communication Output (Modbus RTU)
0.0 to 50.0A (primary heater current reading range) ※1000:1 C.T. Ratio
Contact - On: < 2kΩ, Off: > 90kΩ
Non-Contact - On: < 1.0 V Residual Voltage, Off: < 0.1mA Leakage Current
※TK4S/M-1ea(due to limited terminal), TK4H/W/L-2ea(except TK4SP)
On/Off, P, PI, PD, and PID Control
TK4
TK4M TK4W
100-240 VAC, 50/60 Hz
±10% of rated voltage
Max. 8 VA
9.5X20.0mm 8.5X17.0mm
7.5X15.0mm 6.0X12.0mm
±1℃ will be added.
± 5% F.S. ± 1 digit
250 VAC 3A 1a
11 VDC ± 2 V 20 mA Max.
2 Specifications
TK4H TK4L
7.0X14.6mm 11.0X22.0mm
6.0X12.0mm 7.0X14.0mm
21