5 Preparation and Startup
4
5.3.3
Changing Parameter Settings
Change parameter settings in the following steps:
1
2
3
4
5
5.3.4
MV Monitoring and Manual Control Setting
36
To save, press MODE key or do not make any additional key entries for three
seconds.
S
While in Run mode, press and hold MODE key.
Select the desired Parameter Setting Group using the ▼/▲ keys and press MODE
key.
Select the desired parameter using the MODE key.
Configure the desired numeric value using the ◀/▼/▲ keys.
To save, press MODE key.
© Copyright Reserved Autonics Co., Ltd.