Bps (Bits Per Second) Settings [Par4 → Bps]; Communication Parity Bit [Par4 → Prty]; Communication Stop Bit Settings [Par4 → Stp] - Autonics TK4S User Manual

6 Parameter Settings and Functions
6.6.2 BPS (Bits Per Second) Settings [PAR4 → BPS]
You can set the rate of data transmission.
Setting
Group
PAR4
6.6.3 Communication Parity Bit [PAR4 → PRTY]
Parity bit is a data communication method that adds an additional bit to each character in
transmitted data as an indicator used to verify data loss and corruption. This parameter is
used to enable or disable the parity bit option.
Setting
Group
PAR4
6.6.4 Communication Stop Bit Settings [PAR4 → STP]
You can set the number of bits to mark the end of a transmitted data string.
Setting
Group
PAR4
94
Parameter
24(2400 bps) / 48(4800 bps) / 96(9600
bps)
BPS
/ 192(19200 bps) /384(38400 bps)
The higher the BPS (Bits Per Second), the faster the transmission.
Setting
Disables parity bit.
NONE
Sets the total bits with signal value of 1 as even numbers.
EVEN
Sets the total bits with signal value of 1 as odd numbers.
ODD
Parameter
PRTY
Setting
Sets end of data string to 1 bit.
1
Sets end of data string to 2 bits.
2
Parameter
STP
Setting Range
Description
Setting Range
NONE / EVEN / ODD
Description
Setting Range
1 / 2
© Copyright Reserved Autonics Co., Ltd.
Factory
Unit
Default
bps
96
Factory
Unit
Default
-
NONE
Factory
Unit
Default
bit
2