Model Lineup - Autonics TK4S User Manual

1.3

Model Lineup

TK
① Item
② Digit
③ Size
④ Output Option
⑤ Power Supply
⑥ OUT1 Control Output
⑦ OUT2 Control Output
※1: In case of SP series, option control output selection and digital input will be limited
due to number of terminals.
※2: "S" represents SSRP drive voltage output support model which SSR standard/cycle/
phase control are available. "C" represents both current and SSR(standard) output
support model.
※3:. Select "R" or "C" type in case of using heating & cooling control. "N" type in case fo
using standard control.
© Copyright Reserved Autonics Co., Ltd.
4 S - 1
① ② ③ ④
Category
※ 1
※ 2
※ 3
4 R R
⑤ ⑥ ⑦
TK Temperature/Process controller
4 9999(4Digit type)
SP
48 mm(W) X 48 mm(H) (Plug Type
S 48 mm(W) X 48 mm(H) (Terminal Block Type)
M 72 mm(W) X 72 mm(H)
W 96 mm(W) X 48 mm(H)
H 48 mm(W) X 96 mm(H)
L 96 mm(W) X 96 mm(H)
SP 1 ALARM1 output
1 ALARM1 output
S
2 ALARM1 + ALARM2 output
M
R ALARM1 + Transmission output
W
T ALARM1 + RS485 Comm. output
H
A ALARM1 + ALARM2 + Transmission output
L
B ALARM1+ALARM2+RS485 Comm. output
4 100 to 240VAC, 50/60Hz
R Relay output
S SSRP Output
C Current output + SSR drive output
None ※Select in case of standard control
Standard N
(heating or cooling)
R Relay output
Heating,
Cooling
C Current output + SSR drive output
1 Product Introduction
Description
※ 4
)
17