Choose The Mounting Location - Humminbird 360 Imaging Installation Manual

2

| Choose the Mounting Location

It is important to review the following mounting location requirements, as follows:
• Port (left) or Starboard (right): The Transducer Deployment System can be
mounted on either side of the transom. If there is heavy equipment on one
side, install the Transducer Deployment System on the opposite side. Do not
install it behind the propeller.
• Height: Install the mounting bracket in the highest possible location. This will
provide the most stable support and the greatest amount of vertical and angular
adjustability. The bottom edge of the pod should be no less than 8 inches
(20.3 cm) above the bottom line of the hull to prevent spray and drag conditions.
The pod should sit at or above the waterline when the boat is at rest.
Installation Height, at least 8" (20.3 cm) above the bottom line of the hull
8"
17
Continued...
Installation - Transducer