Humminbird 360 Imaging Installation Manual

Hide thumbs Also See for 360 Imaging:
Table of Contents

Advertisement

360 Imaging
360 Imaging
Installation Guide
Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for Humminbird 360 Imaging

  • Page 1 360 Imaging 360 Imaging ™ ™ Installation Guide Installation Guide...
  • Page 7 Introduction...
  • Page 8: Installation Overview

    Installation Overview Installation...
  • Page 9 Installation...
  • Page 10 Installation...
  • Page 11 Installation...
  • Page 12 Installation - GPS/Heading Sensor...
  • Page 13 Installation - GPS/Heading Sensor...
  • Page 14 Installation - GPS/Heading Sensor...
  • Page 15 Installation - GPS/Heading Sensor...
  • Page 16 Installation - GPS/Heading Sensor...
  • Page 17 Installation - GPS/Heading Sensor...
  • Page 18 Installation - GPS/Heading Sensor...
  • Page 19 Installation - GPS/Heading Sensor...
  • Page 20 Installation - GPS/Heading Sensor...
  • Page 21 Installation - GPS/Heading Sensor...
  • Page 22 Installation Overview Installation - Transducer...
  • Page 23 Choose the Mounting Location Installation - Transducer...
  • Page 24 Installation - Transducer...
  • Page 25 Installation - Transducer...
  • Page 26 Install the Transom Bracket Installation - Transducer...
  • Page 27 Installation - Transducer...
  • Page 28 Install the Transducer Bracket Installation - Transducer...
  • Page 29 Installation - Transducer...
  • Page 30 Install the Transducer Deployment System Installation - Transducer...
  • Page 31 Installation - Transducer...
  • Page 32 Installation - Transducer...
  • Page 33 Route the Cables and Connect Power Installation - Cables...
  • Page 34 Installation - Cables...
  • Page 35 Installation - Cables...
  • Page 36 Installation - Cables...
  • Page 37 Test the Installation Installation - Test...
  • Page 38 Installation - Set up the Control Head...
  • Page 39 Installation - Set up the Control Head...
  • Page 40 Installation - Set up the Control Head...
  • Page 41 Deployment Depth Installation - Set up the Control Head...
  • Page 42 Installation - Set up the Control Head...
  • Page 43 Installation - Set up the Control Head...
  • Page 44 Installation - Set up the Control Head...
  • Page 45 Installation - Set up the Control Head...
  • Page 46 (for devices connected to the Sensor pigtail only) Installation - Set up the Control Head...
  • Page 47 Power Off The Transducer Deployment System is designed with software that keeps the pod fully retracted and stowed while the boat is in use. WARNING! To keep the pod retracted, the Transducer Deployment System must stay powered ON while the boat is underway. When the boat is stored or at dock, the Transducer Deployment System must be turned off to prevent draining the battery.
  • Page 48 Maintenance...
  • Page 49 Maintenance...
  • Page 50 Troubleshooting...
  • Page 51 Troubleshooting...
  • Page 52 Troubleshooting...
  • Page 53 Troubleshooting...
  • Page 54 Removing the Pod (for authorized repair only)
  • Page 55 Removing the Pod (for authorized repair only)
  • Page 56 Removing the Pod (for authorized repair only)
  • Page 57 Reconnecting the Pod (for authorized repair only)
  • Page 58 Reconnecting the Pod (for authorized repair only)
  • Page 59 Reconnecting the Pod (for authorized repair only)
  • Page 60 Specifications...
  • Page 61 Specifications...
  • Page 62 Contact Humminbird®...

Table of Contents