18.Configuration Options
18.4. How to Change Settings for Printing
It is possible to change the content of data to be printed and saved.
1.
Press the F5 key to enter the [SET UP] screen.
(Refer to Section 18.2.)
2.
Move the [
column and press the SET or [
[
] cursor to [SETTING LIST]. [Fig. 1]
3.
To print the result automatically after measurement:
Move the [
1. Press the SET or [
[SETTING VALUE].
2. Move the [
from [NO PRINT], [1 COPY], [2 COPIES] or [3 COPIES]
under [SETTING VALUE].
The default setting is [NO PRINT].
3. Press the SET button to accept the setting value
4. Press the F1 key [EXIT] to return to the default screen.
4.
To print the norm table with measurement results:
1. Move the [
2. Press the SET or [
[SETTING VALUE].
3. Move the [
from [NO PRINT] or [PRINT] under [SETTING VALUE].
The default setting is [PRINT].
4. Press the SET button to accept the setting value.
5. Press the F1 key [EXIT] to return to the default screen.
70
] cursor to [PRINT] under the [MENU]
] cursor to [AUTO PRINT]. [Fig. 3]
] button to move the [
] cursor to the desired setting, selecting
] cursor to [PRINT NORM TABLES].
] button to move the [
] cursor to the desired setting, selecting
] button to move the
] cursor to
] cursor to
[Fig. 1]
[Fig. 2]
[Fig. 3]
[Fig. 4]
[Fig. 5]