Table of Contents
Advertisement
12.AI + Blood Pressure Measurement
7.
A beep will sound* when the data has been saved.
The dark blue message [COMPLETE] will be
displayed at the lower left corner of the screen.
[Fig. 7]
The representative pulse wave (AVG) displayed on
the screen is selected among all detected pulse
waves. It has a stable pulse wave and the closest AI
value to the average. Still, there may be some
difference between AVG and the average.
* The beep will not sound if it is set to OFF using the
settings menu.
AI value and pulses for each
pulse wave (last 20 pulses)
Pulse waveform
Number of sampled
pulse waves
Standard deviation
Pulse wave number
Tonogram and measurement
channel during measurement
Pressure value of the AI
pulse wave sensor during
measurement
Histogram of AI value
for each pulse wave
* The symbols displayed on the left side of cSBP are defined as follows:
[+] AI and blood pressure are simultaneously measured.
[#] A blood pressure fluctuation is detected. Measurement results may be compromised.
[*] The BP value has been manually entered or edited.
* cSBP is displayed only when AVG (representative pulse wave) is selected to display.
34
"Measurement Complete" screen
[Fig. 7]
Current time
Systolic blood
pressure
Diastolic blood
pressure
Pulse pressure
Pressure at peak
of reflected wave
cSBP*
AI value
Pulse rate when
using AI sensor
AI value
normalized to a
pulse rate of 75
Hide quick links:
Advertisement
Table of Contents
