Omron HEM-9000AI Instruction Manual page 72

18.Configuration Options
7.
To print measurement information with measurement
results:
What is measurement information includes the following.
• Tonogram and measurement channel during measurement
• Measurement time
• Number of sampled pulse waves
• Standard deviation of AI value
• Pressure value of the AI pulse wave sensor during
measurement
1. Move the [
2. Press the SET or [
[SETTING VALUE].
3. Move the [
from [NO PRINT] or [PRINT] under [SETTING VALUE].
The default setting is [PRINT].
4. Press the SET button to accept the setting value.
5. Press the F1 key [EXIT] to return to the default screen.
8.
To select whether graph is printed when no previous
data exists.
1. Move the [
RECORDS].
2. Press the SET or [
[SETTING VALUE].
3. Move the [
from [YES] or [NO] under [SETTING VALUE].
The default setting is [NO].
[YES]: Print even when only one piece of data will be
added on the graph.
[NO]: Print only when more than one piece of data will
be added on the graph.
4. Press the SET button to accept the setting value.
5. Press the F1 key [EXIT] to return to the default screen.
72
] cursor to [PRINT MEASUREMENT INFO].
] button to move the [
] cursor to the desired setting, selecting
] cursor to [PRINT GRAPH - WHEN NO
] button to move the [
] cursor to the desired setting, selecting
] cursor to
] cursor to
[Fig. 10]
[Fig. 11]
[Fig. 12]
[Fig. 13]