18.Configuration Options
5.
To change the amount of time between blood pressure measurements.
When selecting [AVERAGE - 2 TIMES] or [AVERAGE - 3 TIMES], it is possible to set the
interval between blood pressure measurements.
1. Move the [
[Fig. 6]
2. Press the SET or [
[SETTING VALUE].
3. Move the [
from [30 sec], [1 min], [2 min] or [3 min].
The default setting is [1 min]. [Fig. 7]
4. Press the SET button to accept the setting value.
5. Press the F1 key [EXIT] to return to the default screen.
6.
To change the [MEASUREMENT LENGTH] under [AI
MEASUREMENT]:
1. Move the [
2. Press the SET or [
[SETTING VALUE].
3. Move the [
selecting from [15 sec], [30 sec], [1 min] or [3 min].
[Fig. 9]
The default setting is [30 sec].
The measurement time set here is the duration of the pulse
wave sampling.
The total time required for measurement is slightly longer.
4. Press the SET button to accept the setting value.
5. Press the F1 key [EXIT] to return to the default screen.
68
] cursor to [AVERAGE - INTERVAL TIME].
] button to move the [
] cursor to the desired interval, selecting
] cursor to [Measurement Length]. [Fig. 8]
] button to move the [
] cursor to the desired measurement time,
] cursor to
] cursor to
[Fig. 6]
[Fig. 7]
[Fig. 8]
[Fig. 9]