How To Change The Settings - Omron R7 Instruction Manual

Explanation of the graph display
When the GRAPH button is pushed the latest
measurement will appear in a flashing
display. In the example the measurement is
made on January 31 at 22:40. The graph
shows 140 mmHg for systolic and 95 mmHg
for diastolic (top and bottom of vertical bar)
and a pulse rate of 90 beats a minute.
When you push the memory button in the
graph display the details of the measurement
will appear. Pushing the graph button again
will bring you back the graph display. You
can use ( ) the arrows in the graph and
memory display to leaf through the
measurements.
The systolic blood pressure is higher than
170mmHg
When a systolic blood pressure above 170
mmHg is measured twice the (
displayed in the graph.
When a systolic blood pressure above 170
mmHg is measured three times the (
symbol disappears and the screen auto-
matically changes to the "hypertension
display". The maximum displayed blood
pressure value (y-axis) will change from 170
mmHg to 210 mmHg.

How to change the settings

The settings of your OMRON R7 blood pressure monitor can be changed according to your
own preferences and comfort.
To enter the setting menu please press the SET button when your blood pressure monitor is
switched off. By using (
again you lock your preference and proceed to the next item as shown in the figure. The on/off
button can be used to switch the monitor off again.
Date of
Measurement
) symbol is
)
Display screen where the
systolic blood pressure
values higher than 170
mmHg are measured
twice
) you can select your preference. By pressing the SET button
Blood Pressure Values
(systolic/diastolic) (mmHg)
Month/Days of a Week
Detail Screen of Data
in Flashing Display
Graph Display Screen of
Hypertension Type
R7 English
Pulse
Rate
13