Omron HEM-907 Instruction Manual
Digital automatic blood pressure monitor
Hide thumbs
Also See for HEM-907:
- User manual ,
- Instruction manual (168 pages) ,
- Instruction manual (32 pages)
Table of Contents
Advertisement
INSTRUCTION MANUAL
OMRON
Digital Automatic Blood Pressure Monitor
Model
HEM-907
Thank you very much for purchasing the
OMRON Digital Automatic Blood Pressure
Monitor.
Requests from OMRON to the
operators and the persons
responsible for maintenance
Please read thoroughly the "Notes on Safety"
of this Instruction Manual before using this unit
so that you can use it safely and correctly after
suf¿ cient understanding.
After reading this Instruction Manual, please
keep it near the unit all the times for future
reference.
= Read the instruction manual carefully
Table of Contents
Intended use ................................................. 2
Exemptions ................................................... 3
Names and Functions of the Parts ............... 4
Notes on Safety ............................................ 8
Components of the Product ....................... 12
Options ....................................................... 12
How to Apply the Arm Cuff ......................... 13
(AC Adapter)........................................... 14
How to Measure Blood Pressure ............... 15
SINGLE Mode ........................................ 16
AVG. Mode ............................................. 17
MANU. Mode .......................................... 18
CHECK Mode ......................................... 19
Battery Pack ........................................... 20
How to Clean the Unit after Use................. 21
List of Error Codes ..................................... 22
Troubleshooting .......................................... 23
Speci¿ cations ............................................. 24
IM-HEM-907-E7-03-01/2012
5329412-4C
1
Advertisement
Table of Contents
Related Manuals for Omron HEM-907
Summary of Contents for Omron HEM-907
-
Page 1: Table Of Contents
Digital Automatic Blood Pressure Monitor Model HEM-907 Thank you very much for purchasing the Table of Contents OMRON Digital Automatic Blood Pressure Intended use ..........2 Monitor. Exemptions ........... 3 Requests from OMRON to the Names and Functions of the Parts ....4 Notes on Safety .......... -
Page 2: Intended Use
Intended Use Medical Purpose This is a medical device that measures the brachial blood pressure in a non-invasive manner. Intended User Legally certi¿ ed: such as doctor, nurse and medical expert. Patient Population It is used on adult patients only. Environment The instrument is used in physicians’... -
Page 3: Exemptions
When a problem or damage occurs caused by the maintenance and/or repair con- ducted by a person other than OMRON or the dealer speci¿ ed by OMRON The problem or damage of OMRON product caused by the product of other manu-... -
Page 4: Names And Functions Of The Parts
Names and Functions of the Parts Main unit 1. LCD display 6. ON/OFF (power) Button 2. HIDE (non-display) Button 7. START Button 8. DEFLATION (deÀ ation control) Button 3. DC jack 9. Arm Cuff Connector 4. P-SET (pressure setting) Volume 10. - Page 5 Names and Functions of the Parts Ready to Measure Display Pulse level / Number of irregular pulse waves Number of irregular pulse waves: The pulse wave having a difference of more than ±25% from the average Systolic blood interval of pulse waves is determined pressure as irregular.
- Page 6 Names and Functions of the Parts Explanation of Functions (1) Pressure setting function P - SET InÀ ation can be set by AUTO (automatic setting) or the target value. AUTO (automatic setting): In the SINGLE (single measurement), AVG. (average), and MANU. (auscultation) Modes, the monitor estimates the systolic blood pressure value during inÀ...
- Page 7 Names and Functions of the Parts (4) Setting mode change function You can set the number of times to measure, the waiting time until the start of measurement, and the interval between measurements. Items to set Set value Number of measurements 2 times, 3 times Waiting time until the start of measurement 0 sec, 3 min, 5 min, 10 min.
-
Page 8: Notes On Safety
Notes on Safety • The warning signs and the sample icons shown here are listed for you to use the product safely and correctly as well as to prevent the risk and the damage to you and others from happening. •... - Page 9 Notes on Safety Caution When you are not going to use the unit for a long period of time, be sure to remove the AC adapter from the electric outlet. • You may suffer electric shock, or electric leak or ¿ re may arise because of deteriorated insulation. Be sure to remove the AC adapter from the electric outlet when installing, removing, or cleaning the part.
- Page 10 The power cord will be disconnected or shorted and may cause ¿ re or electric shock. Do not install or store the unit where it may be sprayed with water or medication. • You may suffer electric shock. Requests from OMRON • Do not place or put anything on the unit. •...
- Page 11 Turn off the power and pull the AC adapter from the electric outlet. If an optional battery pack is used, remove it also. Display “Trouble” on the unit so that it cannot be used. Contact the dealer where you purchased the unit or the nearest OMRON dealer...
-
Page 12: Components Of The Product
Components of the Product Main unit Accessories Medium size arm cuff (with built-in air bag) Instruction Manual Model: HEM-9CMC (with guarantee card) Art.no.: 4928640-0 Air tube (1 m) Applicable arm circumference: 22 to 32 cm Art.no.: 4928647-8 AC adapter Battery pack (80230H907S) (48H907N-E) Model: HEM-9ADAP... -
Page 13: How To Apply The Arm Cuff
How to Apply the Arm Cuff Warning Requests from OMRON • Do not use the unit to the patient using a pump oxy- Do not apply the arm cuff during the intravenous genator. injection or transfusion. • • Intravenous injection or transfusion is impossible. -
Page 14: How To Use The Power Source (Ac Adapter)
When using an optional battery pack, the AC adapter You may suffer electric shock. functions as the charger also. Requests from OMRON • If this unit is used concurrently with other unit, be sure to read the Instruction Manual of the other unit to be used concurrently and understand the warnings and cautions before use. -
Page 15: How To Measure Blood Pressure
You may suffer peripheral neuropathy. (2) When an error is generated or the measured value is doubtful Requests from OMRON · An error may be displayed when an external vibra- tion is applied or the patient moves his/her body. Be sure that the patient should not touch the unit. - Page 16 How to Measure Blood Pressure (in SINGLE Mode) Wrap the arm cuff over the Push the ON/OFF (power) ON/OFF patient’s arm. Button to turn on the power. START HIDE P-SET MODE SINGLE AVG. MANU. CHECK STOP AUTO Set the MODE Selector to Set the P-SET (pressure set- ON/OFF ON/OFF...
- Page 17 How to Measure Blood Pressure (in AVG. Mode) Wrap the arm cuff over the Push the ON/OFF (power) patient’s arm. Button to turn on the power. ON/OFF START HIDE P-SET MODE SINGLE AVG. MANU. CHECK STOP AUTO Set the P-SET (pressure set- Set the MODE Selector to ting) Volume to “AUTO”...
- Page 18 How to Measure Blood Pressure (in MANU. Mode) Wrap the arm cuff over the Place the stethoscope on the patient’s arm. patient’s arm. ON/OFF START HIDE P-SET MODE AVG. SINGLE MANU. CHECK STOP AUTO Set the MODE Selector to Push the ON/OFF (power) ON/OFF “MANU.”.
- Page 19 (1) In the measuring rule, the test tolerance of blood pressure monitor (accuracy of pressure when shipped from the factory) should not exceed 3 mmHg. (2) If the CHECK result is +/- 3 mmHg or above, contact the dealer where you purchased this unit or the nearest OMRON dealer.
-
Page 20: Installation And Replacement Of Battery Pack
Installation and Replacement of Battery Pack Warning Caution Do not disassemble or modify the battery pack. Do not short the polarities of battery using metal Do not throw the battery pack into ¿ re or heat it. object such as the wire. Do not charge the battery pack by using equip- If the À... -
Page 21: How To Clean The Unit After Use
How to Clean the Unit after Use Caution Requests from OMRON Pull the AC adapter from the electric outlet when • cleaning the unit. Do not clean the unit with gasoline, thinner, or high • You may suffer electric shock. -
Page 22: List Of Error Codes
Pule rate did not stay within the range of 30 to 199 beats/min. • Device error Contact the dealer where you purchased the unit or • There is a problem with the main unit of the the nearest OMRON dealer. blood pressure monitor. -
Page 23: Troubleshooting
Troubleshooting If a trouble occurs while using the unit, please check the following. Problem What to inspect How to correct Wrap the arm cuff correctly, and measure Is the arm cuff wrapped correctly? again. Ask the patient not to move his/her arm or Is the patient moving his/her arm or body body during measurement, and measure The unit inÀ... -
Page 24: Speci¿ Cations
Speci¿ cations Name OMRON Digital Automatic Blood Pressure Monitor HEM-907 Model HEM-907-E / HEM-907-E7 Display Digital display Measurement Oscillometric method Measurement Range Pressure; 0 to 299 mmHg Pulse rate: 30 to 199 beats/min Accuracy Pressure; Within +/-3 mmHg Pulse rate; Within +/-5% of reading InÀ... - Page 25 Manufacturer OMRON HEALTHCARE Co., Ltd. 53, Kunotsubo, Terado-cho, Muko, Kyoto, 617-0002 JAPAN EU-representative OMRON HEALTHCARE EUROPE B.V. Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS www.omron-healthcare.com OMRON HEALTHCARE Co., Ltd. Production facility Mie, JAPAN OMRON HEALTHCARE UK LTD. Opal Drive Fox Milne, Milton Keynes, MK15 0DG, U.K.
- Page 26 7 m. Verify correct operation of the device in case the distance is shorter. Further documentation in accordance with EN60601-1-2:2007 is available at OMRON Healthcare Europe at the address mentioned in this instruction manual. Documentation is also available at www.omron-healthcare.com.
Need help?
Do you have a question about the HEM-907 and is the answer not in the manual?
Questions and answers
Tube does not seem to inflate.
The tube may not be inflating on the Omron HEM-907 due to the following reasons:
1. The rubber tube connecting the arm cuff and the main unit is loose.
2. The rubber tube is bent.
3. The arm cuff is wrapped loosely.
4. The connector of the rubber tube is not securely attached to the base of the air connector.
To correct this, ensure all connections are secure, the tube is straight, and the cuff is wrapped properly.
This answer is automatically generated