Table of Contents
Advertisement
18.Configuration Options
18.10.Memory Card
If it becomes necessary to change the memory card once it becomes nearly full, it is possible to
copy patient ID information that is already registered on the old card to a new card.
Only the ID information will be copied. The measurement results will not be copied.
1.
Press the F5 key to enter the [SET UP] screen. (Refer to Section 18.2.)
2.
Move the [
] cursor to [OTHER SETTINGS] under the
[MENU] column and press the SET or [
move the [
3.
How to eject and replace the memory card
1. Move the [
[Fig. 2]
2. Press the SET button.
The confirmation message [Copy ID DATA to another memory
card?] is displayed. [Fig. 3]
The memory card can be also rejected by pressing the F6 key
[EJECT] after step 1. Follow the steps thereafter.
3. If you want to transfer the stored data to the next card
inserted, press the F2 key [Yes].
* The message [Push eject button, remove the memory card
and insert a new memory card.] will be displayed.
If not copying, press the F3 key [No].
* The message [Memory card can now be ejected.] will be
displayed.
4. Press the eject button on the right side of the main unit. It
will unlock and eject the card.
5. Insert a new memory card. [Fig. 4]
If you selected copy above, using the F2 key [YES], the
message [Now copying ID DATA. Do not touch memory
card.] will be displayed.
* If the inserted memory card already has finished saving data,
the confirmation message [Data is already saved on this
memory card. Do you still want to format it?] will be displayed.
To format the card, press the F2 key [YES]; to skip formatting,
press the F1 key [CANCEL].
Even if it is not necessary to copy ID information, be sure to execute the [Eject memory card]
procedure before removing the card, or take the card out after the device has been turned off. If a card
is removed improperly, the next card inserted will not be recognized. It can also cause data corruption.
6. Press the F1 key [EXIT] to return to the default screen.
80
] cursor to [SETTING LIST]. [Fig. 1]
] cursor to [EJECT MEMORY CARD].
] button to
[Fig. 1]
[Fig. 2]
[Fig. 3]
[Fig. 4]
Hide quick links:
Advertisement
Table of Contents
