Adding And Modifying Blood Pressure Measurement Values - Omron HEM-9000AI Instruction Manual

16.7. Adding and Modifying Blood Pressure Measurement Values

It is possible to modify blood pressure measurement
results from AI blood pressure measurements or add
blood pressure measurement results to AI
measurements.
1.
When F5 [EDIT BP] is displayed, it is possible to
enter and modify blood pressure measurement
values. [Fig. 20]
Select the data, using the cursor and press the F5 key
[EDIT BP].
However, it is not possible to modify blood pressure
measurement results obtained in blood pressure
measurement mode. It is not possible to modify AI
measurement results either.
2.
Input values for each field on the Manual Blood
Pressure Entry screen. [Fig. 21]
(Refer to "How to Enter Text" in Step 2, Section 17.1. for
details on text entry.)
Each item can be input in the following ranges.
SYS 1-299
DIA 0-298
* If an inappropriate value is input, [This value is out of range]
is displayed. For example, if SYS<DIA the value is out of
range.
3.
When you have finished entering data, press the F1
key [SAVE AND EXIT].
(The confirmation message [Do you want to save data?]
will be displayed.) [Fig. 22]
Screen for [ALL DATA LIST BY ID]
16.Memory Retrieval
[Fig. 20]
[Fig. 21]
EN
[Fig. 22]
55