Omron HEM-9000AI Instruction Manual page 60

17.Registering ID Information
8.
How to Register measurement information [Fig. 10]
[HEIGHT], [WEIGHT] and [NOTES] can be entered as
measurement information. You may change to either
metric or English measurements as preferred. Refer to
Section 18.5. for details.
The cursor will not move to the BMI field.
After entering height and weight and moving to the next
field, the BMI will be automatically calculated based on
the height and weight information entered.
Measurement information can be entered for each
measurement.
The field can contain up to 32 characters.
9.
Completing Registration
Once the data has been entered for each field, press the
F1 key [SAVE]. [Fig. 11]
Once registration is complete, the default screen appears
and the name displayed in the upper-left part of the
screen will change to the ID that was just registered.
* If the birth date or gender is blank, the confirmation
message will be displayed as the norm table will not be
plotted properly.
60
[Fig. 10]
[Fig. 11]