How To Use The Graph Function; How To Change The Settings - Omron INTELLI 637IT Instruction Manual

Automatic blood pressure monitor for measurement at the wrist
Table of Contents

Advertisement

How to use the graph function

This monitor has the possibility to display the stored measurements as a graph. In order to get a clear
history of your blood pressure the measurements are put in time zones:
• Morning: Measurements made between 0:00 and 9:59
• Daytime: Measurements made between 10:00 and 17:59
• Evening: Measurements made between 18:00 and 23:59
The last measurement in each time zone will be displayed. For example if you measure 3 times in the
same time zone on the same day only the third reading will be displayed. On the other hand all read-
ings will be stored in the memory (See also page 11).
There are three different graphs available:
• All data graph: displays all measurements per week
• Morning data graph: displays all morning measurements per week
• Evening data graph: displays all evening measurements per week
No graph display is provided for daytime data only.
To display the graph push the GRAPH CALL button.
All Data Graph is displayed.
Push the GRAPH CALL button again to display the
Morning Data Graph.
Push the GRAPH CALL button again to display the
Evening Data Graph.
• Each time you push the GRAPH CALL button, All,
Morning, and Evening data are displayed in that
order repeatedly.
12
All Data Graph
Morning
Data
Mark
Morning Data Graph
Night
Data
Mark
Night Data Graph
Explanation of the graph display
When the GRAPH button is pushed the latest
measurement will appear in a flashing display.
In the example the measurement is made on
January 31 at 22:40. The graph shows 140
mmHg for systolic and 95 mmHg for diastolic
(top and bottom of vertical bar) and a pulse rate
of 90 beats a minute.
When you push the memory button in the
graph display the details of the measurement
will appear. Pushing the graph button again will
bring you back the graph display. You can use
(
) the arrows in the graph and memory dis-
play to leaf through the measurements.
The systolic blood pressure is higher than
170mmHg
When a systolic blood pressure above 170
mmHg is measured twice the (
) symbol is
displayed in the graph.
When a systolic blood pressure above 170
mmHg is measured three times the (
) sym-
bol disappears and the screen automatically
changes to the "hypertension display". The
maximum displayed blood pressure value
(y-axis) will change from 170 mmHg to 210
mmHg.

How to change the settings

The settings of your OMRON 637IT blood pressure monitor can be changed according to your own
preferences and comfort.
To enter the setting menu please press the SET button when your blood pressure monitor is switched
off. By using (
) you can select your preference. By pressing the SET button again you lock your
preference and proceed to the next item as shown in the figure. The on/off button (O/I) can be used to
switch the monitor off again.
Blood Pressure Values (sys-
Date of
tolic/diastolic) (mmHg)
Measurement
Month/Days of a Week
Detail Screen of Data
in Flashing Display
Display screen where the
Graph Display Screen of
systolic blood pressure
Hypertension Type
values higher than 170
mmHg are measured
twice
Pulse
Rate
13

Advertisement

Table of Contents
loading

Table of Contents