Setup Wizard Step 2 Of 11: Networking Settings - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual

Setup Wizard Step 2 of 11: Networking Settings

Figure 2-11
Enter the settings as explained in
screen.
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the network settings by selecting Global Settings > Network Settings. For more
information about these network settings, see
page 3-1.
Table 2-1. Setup Wizard Step 2: Network Settings
Setting
Management Interface Settings
System Name
Using the Setup Wizard to Provision the STM in Your Network
Table 2-1 on page
Description (or Subfield and Description)
The name for the STM for purposes of identification and management. The
default name is the name of your model (STM150, STM300, or STM600).
v1.0, September 2009
2-11, then click Next to go the following
"Configuring Network Settings" on
2-11