Configuring The E-Mail Notification Server - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual

Configuring the E-mail Notification Server

If you have used the Setup Wizard, you might have already configured the e-mail notification
server; the E-mail Notification Server screen allows you to modify these settings.
The STM can automatically send information such as notifications and reports to an administrator.
You must configure the necessary information for sending e mail, such as the administrator's
e-mail address, the e-mail server, user name, and password.
To configure the e-mail notification server:
1. Select Global Settings > Email Notification Server from the menu. The Email Notification
Server screen displays.
Figure 6-1
2. Complete the fields, select the radio button and checkboxes, and make your selections from
the pull-down menus as explained in
Table 6-1. E-mail Notification Settings
Setting
Show as Mail sender
Send Notifications to
6-2
Table 6-1.
Description (or Subfield and Description)
A descriptive name of the sender for e-mail identification purposes. For
example, enter stm600notification@netgear.com.
The email address to which the notifications should be sent. Typically, this is the
e-mail address of a user with administrative privileges.
v1.0, September 2009
Monitoring System Access and Performance