Setup Wizard Step 11 Of 11: Restarting The System; Verifying Proper Installation; Testing Connectivity; Testing Http Scanning - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Click Apply to save your settings and automatically restart the system or click Back to make
changes to the configuration.

Setup Wizard Step 11 of 11: Restarting the System

Figure 2-20
Wizard screen 11 is just an informational screen to let you know that the S restarts automatically
with the new configuration.

Verifying Proper Installation

Test the STM before deploying it in a live production environment. The following instructions
walk you through a couple of quick tests designed to ensure that your STM is functioning
correctly.

Testing Connectivity

Verify that network traffic can pass through the STM:
• Ping an Internet URL.
• Ping the IP address of a device on either side of the STM.

Testing HTTP Scanning

If client computers have direct access to the Internet through your LAN, try to download the
eicar.com test file from http://www.eicar.org/download/eicar.com.
Using the Setup Wizard to Provision the STM in Your Network
v1.0, September 2009
2-27