NETGEAR STM150 Appliance Reference Manual page 152

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Table 4-17. Add Exception Settings (continued)
Setting Description
Applies to RADIUS User
(continued)
Start Time The time in 24-hour format (hours and minutes) when the action will start. If you leave
these fields empty, the action applies continuously.
End TIme The time in 24-hour format (hours and minutes) when the action will end. If you leave
these fields empty, the action applies continuously.
Category From the pull-down menu, select the category to which the action applies:
• URL Filtering. The action applies to a URL. Enter the URL in the Subcategory field.
• Web category. The action applies to a Web category. Select a category from the
Subcategory pull-down menu.
• Application. The action applies to an application. Select an application from the
Subcategory pull-down menu.
Subcategory The nature of the Subcategory field depends on your selection from the Category pull-
down menu.
• When you select URL Filtering: The Subcategory field becomes a blank field in which
you can enter a full or partial URL.
• When you select Web category: The Subcategory field becomes a pull-down menu
that lets you select a Web category.
• When you select Application: The Subcategory field becomes a pull-down menu that
lets you select an application.
Notes A description of the exception rule for identification and management purposes or any
other relevant information that you wish to include.
4. Click Apply to save your settings. The new exception rule is added to the Exceptions table. To
return to the Exception screen without adding the rule, click Return.
5. Select the checkbox to the left of the rule that you want to enable or click the select all table
button to select all rules.
6. Click the enable table button to enable the selected rule or rules.
4-54
Do the following to specify a RADIUS domain to which the exception
will be applied:
1. From the Domain pull-down menu, select a RADIUS domain.
2. From the VLAN ID/Name pull-down menu, select a VLAN ID or
VLAN name.
3. Click the apply button to apply the exception to the selected
VLAN.
You can specify RADIUS domains and VLANs on the RADIUS screen
(see "Creating and Deleting RADIUS Domains" on page
v1.0, September 2009
Content Filtering and Optimizing Scans
5-19).