ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
•
Groups defined by IP address and subnet. These are groups that you previously created on
another device in your network. The STM does not let you add or remove users from such
groups. These groups can be on your local network or on a remote device.
Note: If you use groups on a remote device, you must configure your network's
firewall to allow access to the IP address and subnet mask that have been
assigned to the remote group.
Creating and Deleting Groups by Name
To create a local group by name:
1. Select User Management > Groups from the menu. The Groups screen displays
contains one example).
Figure 5-1
The List of Groups table displays the local groups with the following fields:
•
Name. The name of the group, which is the defining characteristic of the group.
•
Brief Description. An optional brief description of the group.
•
Action. The edit table button that provides access to the Edit Group screen and the delete
table button that allows you to delete the group.
Managing Users, Groups, and Authentication
v1.0, September 2009
(Figure 5-1
5-3