Creating And Deleting Groups By Ip Address And Subnet - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual

Creating and Deleting Groups by IP Address and Subnet

To create a group by IP address and subnet:
1. Select User Management > IP Subnet/Groups from the menu. The IP Subnet/Groups screen
displays. (Figure 5-1contains one example).
Figure 5-3
The Groups Membership by IP Address table displays the groups with the following fields:
• IP Address. The IP address for the group.
• Netmask. The subnet mask for the group.
• Name. The name of the group.
• Action. The delete table button that allows you to delete the group.
2. In the Add New IP Subnets/Groups section of the screen, complete the fields as explained in
Table 5-3.
Table 5-3. IP Subnet/Group Settings
Setting
IP Address
Netmask
Name
3. Click the add table button. The new group is added to the Groups Membership by IP Address
table.
5-6
Description
An IP address on your local network or on a remote device to which the users are
assigned.
The subnet mask to which the users are assigned. For an individual IP address,
specify 255.255.255.255.
A descriptive (alphanumeric) name of the group for identification and management
purposes.
v1.0, September 2009
Managing Users, Groups, and Authentication