Registering The Stm With Netgear - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
The eicar.com test file is a legitimate DoS program and is safe to use because it is not a malware
and does not include any fragments of malware code. The test file is provided by EICAR, an
organization that unites efforts against computer crime, fraud, and misuse of computers or
networks.
Verify that the STM properly scans HTTP traffic:
1. Log on to the STM Web Management Interface, and then verify that HTTP scanning is
enabled. For information about how to enable HTTP scanning, see
Scanning Settings" on page 5-2
2. Check the downloaded eicar.com test file, and note the attached malware information file.

Registering the STM with NETGEAR

To receive threat management component updates and technical support, you must register your
STM with NETGEAR. The support registration key is provided with the product package (see
"Service Registration Card with License Keys" on page
Note: Activating the service licenses initiates their terms of use. Activate the licenses
only when you are ready to start using this unit. If your unit has never been regis-
tered before you can use the 30-day trial period for all 3 types of licenses to per-
form the initial testing and configuration. To use the trial period, do not click
Register in
2-28
and "Customizing Web Scanning Settings" on page
step 4 of the procedure below but click Trial instead.
Using the Setup Wizard to Provision the STM in Your Network
v1.0, September 2009
"Customizing E-mail
1-6).
5-12.