Querying Logs And Generating Reports - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Table 6-8. System Status Information
Setting
System Information
Firmware Information
Hardware Serial Number
License Expiration Date
Management Interface Information
System Name
IP Address
Subnet Mask
Gateway IP Address
Primary DNS
Secondary DNS
Interfaces
The MAC addresses of the STM's interfaces. (
screen for the STM600.)
STM600: MGMT (Management), PAIR1 DOWNLINK, PAIR1 UPLINK, PAIR2 DOWNLINK, PAIR2 UPLINK.
STM300: MGMT, DOWNLINK, UPLINK.
STM150: LAN, WAN. (The four LAN interfaces share a single MAC address.)

Querying Logs and Generating Reports

The extensive logging and reporting functions of the STM let you perform the following tasks that
help you to monitor the protection of the network and the performance of the STM:
Monitoring System Access and Performance
Description
The current version and most recent update (that is, the most recently
downloaded version) for the software, scan engine, pattern file, and operating
system (OS).
The hardware serial number of the STM.
The license keys and the expiration dates for the e-mail protection, Web
protection, and maintenance and support licenses.
Note: When a license has expired, the license expiration date is displayed in
red font.
When a license expires, a LED (see below) on the front panel of the STM blinks
continuously to remind you to renew the license. To stop the blinking of the
LED, click Stop LED Blinking.
On the STM150: The Test LED blinks when a license expires.
On the STM300 and STM600: The Status LED blinks when a license expires.
These fields are self-explanatory. You can configure these fields on the Network
Settings screen (see "Configuring Network Settings" on page
Figure 6-10 on page 6-20
v1.0, September 2009
3-1).
displays the System Status
6-21