Setup Wizard Step 4 Of 11: Email Security - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual

Setup Wizard Step 4 of 11: Email Security

Figure 2-13
Enter the settings as explained in
screen..
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the email security settings by selecting Email Security > Policy or Email
Security > Anti-Virus. The Email Anti-Virus screen also lets you specify
notification settings and email alert settings. For more information about these
settings, see
Tip: To enhance performance, you can disable scanning of any protocols that will be
used seldom or never. Be mindful of the difference between user- and
server-generated traffic. For example, your mail server might not use IMAP, but
some users might configure IMAP clients.
Using the Setup Wizard to Provision the STM in Your Network
Table 2-3 on page
"Configuring E-mail Protection" on page
v1.0, September 2009
2-16, then click Next to go the following
4-4.
2-15