Setup Wizard Step 3 Of 11: Time Zone - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual

Setup Wizard Step 3 of 11: Time Zone

Figure 2-12
Enter the settings as explained in
screen.
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the date and time by selecting Administration > System Date & Time. For more
information about these settings, see
page 3-5.
Using the Setup Wizard to Provision the STM in Your Network
Table 2-2 on page 2-14, then click Next to go the following
"Configuring Date and Time Service" on
v1.0, September 2009
2-13