Matrix Fitness PCTV Service Manual page 33

3.5 PCtV BRACKEt INStALLAtIoN & CoNSoLE SEtUP - t3x LMM CoNSoLE - CoNtINUEd
15) Install the PCTV to the TV mounting bracket using the 4 screws shipped in the back of the PCTV (Figure P).
16) Run the coax cable from the TV bracket to the back of the PCTV and screw it in (Figure Q).
17) Plug the TV power wire from the console mast into the TV power wire from Step 6. Both wires are labeled TV (Figure R).
18) Plug the controller wire from the TV bracket kit into the C-Safe Board near the top of the console (Figure S).
19) If the system is wired plug the Net Wire from Step 13 into the 8 pin connector coming up the console mast with the console cable (Figure T).
If the system is wireless, skip this step.
32
BRACKEt INStALLAtIoN & CoNSoLE SEtUP
FIGURE P
FIGURE R
FIGURE t
FIGURE Q
FIGURE S