Matrix Fitness PCTV Service Manual page 24

BRACKEt INStALLAtIoN & CoNSoLE SEtUP
3.3 PCtV BRACKEt INStALLAtIoN & CoNSoLE SEtUP - 5x UNIVERSAL LMM CoNSoLE - CoNtINUEd
13) Mount the PCTV to the bracket using 4 screws shipped in the back of the TV (Figure P).
14) Run the coax cable from the TV bracket to the back of the PCTV and screw it in (Figure Q).
FIGURE P
15) Plug the power wire from the TV bracket into the back of the TV (Figure R).
16) Plug the side of the controller wire labeled TO TV into the port titled PCTV (Figure S).
FIGURE R
17) If the system is wired, plug the net wire (yellow) from the TV bracket kit into the Net port in the back of the PCTV (Figure T). If the system is
wireless, skip this step.
18) If the PCTV is wireless, plug the wireless dongle into the USB port on the back of the PCTV (Figure U). If the system is wired, skip this step.
FIGURE t
FIGURE Q
FIGURE S
FIGURE U
23