Matrix Fitness PCTV Service Manual page 22

BRACKEt INStALLAtIoN & CoNSoLE SEtUP
3.3 PCtV BRACKEt INStALLAtIoN & CoNSoLE SEtUP - 5x UNIVERSAL LMM CoNSoLE - CoNtINUEd
6) Plug the head phone jack wire into the upper board and the connection board on the console back cover (Figures E & F) and put the console
back together by replacing the screws removed in Step 3. NOTE: There is an existing wire in the UCB and connection board that will need to
be removed and discarded.
FIGURE E FIGURE F
7) Remove the 4 screws holding the small Matrix Fitness logo to the front of the console mast and remove the logo (Figures G & H). This piece
is no longer needed.
FIGURE G FIGURE H
8) Install the rubber pad from the TV bracket kit over the hole in the console mast (Figures I & J).
FIGURE I FIGURE J
21