Matrix Fitness PCTV Service Manual page 9

NEtWoRK CoNFIGURAtIoN & SEtUP
2.2 SEttING UP A WIRELESS NEtWoRK - CoNtINUEd
4.
After all the APs are up and running, perform a post installation coverage check. There are many tools that can be loaded onto a laptop
that will allow you to check RSSI (received signal strength intensity) values such as InSSIDer (available for free from Metageek). With this
program, or another program, installed on a laptop or smartphone, check the RSSI values around the fitness equipment. Values that are
greater than -70 dBm are required. If it is noticed that the signal strength is significantly lower than this value (-75 dBm or less), consider
installing additional access points.
8