Pctv Bracket Installation & Console Setup - 5X Universal Lam Console - Matrix Fitness PCTV Service Manual

BRACKEt INStALLAtIoN & CoNSoLE SEtUP
3.4 PCtV BRACKEt INStALLAtIoN & CoNSoLE SEtUP - 5x UNIVERSAL LAM CoNSoLE
NOTE: There is more than one version of the Universal 5x console, please make sure the correct instructions for the console are being
used.
1) Remove the console from the unit as outlined in Section 9.1.
2) Remove the 6 screws holding the console front to the back and split the console (Figures A & B).
FIGURE A
3) Remove the 2 screws holding on the blank headphone jack plastic to the console, and remove the plastic (Figures C & D).
FIGURE C
4) Remove the wire in the console that goes from the UCB to the board on the console back (Figure E).
5) Install the new Y cable sent with the TV bracket kit to replace the wire removed in Step 4 (Figure F).
FIGURE E
FIGURE B
FIGURE d
FIGURE F
25