Matrix Fitness PCTV Service Manual page 43

3.7 PCtV BRACKEt INStALLAtIoN & CoNSoLE SEtUP - UNIVERSAL 3x CoNSoLE - CoNtINUEd
17) Plug the side of the controller wire labeled TO TV into the port Titled PCTV (Figure Q).
18) If the system is wired, plug the Net Wire from the TV Bracket kit into the Net port in the back of the PCTV (Figure R). If the system is wire-
less, skip this step.
19) If the PCTV is wireless, plug the wireless dongle into the USB port on the back of the PCTV (Figure S) and use the double sided tape to
secure the dongle to the PCTV plastics. (Figure T)
20) Install the PCTV onto the bracket making sure that the tabs on the TV lower plastic shield fit into the slots in back of the console (Figure U)
and secure the PCTV to the bracket with 4 screws (Figure V).
42
BRACKEt INStALLAtIoN & CoNSoLE SEtUP
FIGURE Q
FIGURE S
FIGURE U
FIGURE R
FIGURE t
FIGURE V