IMPORTANT PRECAUTIONS SAVE THESE INSTRUCTIONS • When using Matrix Cycles, basic precautions should always be followed, including the following: Read all instructions before using this equipment. It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all warnings and precautions. •...
POWER REQUIREMENTS DEDICATED CIRCUIT AND ELECTRICAL INFO for power. These cycles can be daisy-chained RG6 coaxial cable with ‘F Type’ compression together with up to 4 units per 15 A circuit. This fittings will need to be connected between the A “Dedicated Circuit”...
ASSEMBLY UNPACKING Page Upright Cycles Unpack the equipment where you will be using it. Place the carton on a level flat surface. It is recommended that you place a protective covering on your floor. Never open box when it is on its side. IMPORTANT NOTES During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded.
Page 6
PULSE GRIPS RESISTANCE TOGGLES U7xi U7xe WATER BOTTLE POCKETS CONSOLE U3xe HANDLEBARS ACCESSORY TRAY SEAT CONSOLE MAST CRANK SEAT ADJUSTMENT LEVER PEDALS STEP PLATE REAR FRAME HANDLE FRONT SHROUD COVER REAR FRAME COVER FRONT STABILIZER TUBE REAR STABILIZER TUBE TRANSPORT WHEELS...
Yellow Hardware Bag Upright Cycle Assembly Description Bolt Flat Washer U7xi U7xe TOOLS REQUIRED: U3xe F 4 mm Allen Wrench F 6 mm Allen Wrench F 8 mm Allen Wrench F Flat Wrench (15mm/17mm 325L) F Phillips Screwdriver PARTS INCLUDED:...
Page 8
Black / Red Hardware Bags Green Hardware Bag Description Description Bolt (black) Screw Screw U7xi Bolt (chrome) Tooth Washer U7xe U3xe...
Page 9
White / Green Hardware Bags Purple Hardware Bag ASSEMBLY COMPLETE! Description Description Screw Bolt Bolt Spring Washer U7xi Pre-Installed Hardware U7xe Description Bolt U3xe...
Page 10
SEAT BACK CONSOLE R7xi R7xe SEAT BASE CONSOLE HANDLEBARS R3xe SEAT FRAME CONSOLE MAST SEAT RAMP PULSE GRIPS / RESISTANCE TOGGLES WATER BOTTLE POCKETS CRANK SEAT ADJUSTMENT LEVER PEDALS REAR FRAME HANDLE FRONT SHROUD COVER REAR STABILIZER TUBE FRONT STABILIZER TUBE REAR FRAME COVER TRANSPORT WHEELS MAIN FRAME...
Page 11
Yellow Hardware Bag Recumbent Cycle Assembly Description Bolt Flat Washer R7xi R7xe TOOLS REQUIRED: R3xe F 4 mm Allen Wrench F 6 mm Allen Wrench F Flat Wrench (15mm/17mm 325L) F Phillips Screwdriver PARTS INCLUDED: F 1 Main Frame F 1 Rear Stabilizer Tube F 1 Front Stabilizer Tube F 1 Rear Frame Handle F 1 Rear Frame Cover...
Page 12
Black / Red Hardware Bags White / Green Hardware Bags Description Description Bolt (black) Bolt Screw Screw R7xi Bolt (chrome) Tooth Washer R7xe R3xe...
Page 13
Pink / Blue Hardware Bags Purple / Orange Hardware Bag Description Description Screw Bolt Bolt Spring Washer R7xi Spring Washer Wavy Washer Bolt R7xe R3xe...
Page 15
SEAT BACK PULSE GRIPS / RESISTANCE TOGGLES H7xi H7xe ARM REST HANDLEBARS CONSOLE H3xe SEAT FRAME PULSE GRIP HANDLEBARS SEAT BASE CONSOLE MAST SEAT RAMP CRANK MAIN FRAME PEDALS REAR FRAME HANDLE FRONT SHROUD COVER REAR FRAME COVER FRONT STABILIZER TUBE REAR STABILIZER TUBE TRANSPORT WHEELS SEAT ADJUSTMENT LEVER...
Page 16
Yellow Hardware Bag Hybrid Cycle Assembly Description Bolt Flat Washer H7xi H7xe TOOLS REQUIRED: H3xe F 4 mm Allen Wrench F 6 mm Allen Wrench F 8 mm Allen Wrench F Flat Wrench (15mm/17mm 325L) F Phillips Screwdriver PARTS INCLUDED: F 1 Main Frame F 1 Rear Stabilizer Tube F 1 Front Stabilizer Tube...
Page 17
Black / Red Hardware Bags Green / Blue Hardware Bag Description Description Bolt (black) Screw Screw Bolt H7xi Bolt (chrome) Heavy Washer Tooth Washer H7xe H3xe...
BEFORE YOU BEGIN POWER LOCATION OF THE UNIT If the equipment is powered by a power supply, the power must be plugged into the power jack, which is located in the front of the equipment near the Place the equipment on a level and stable surface away from direct sunlight. stabilizer tube.
PROPER USAGE USING THE HEART RATE FUNCTION The heart rate function on this product is not a medical device. While heart rate grips To determine proper seat position, sit on the seat and position can provide a relative estimation of your actual heart rate, they should not be relied the ball of your foot on the center of the pedal.
MAINTENANCE MAINTENANCE SCHEDULE 1. Any and all part removal or replacement must be performed by a qualified service technician. ACTION FREQUENCY 2. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX dealer. Unplug the unit.