Matrix Fitness PCTV Service Manual page 14

BRACKEt INStALLAtIoN & CoNSoLE SEtUP
3.1 PCtV BRACKEt INStALLAtIoN & CoNSoLE SEtUP - 5x tM LMM CoNSoLE - CoNtINUEd
4) Plug the TV power wire into the back of the TV (Figure E)
5) Plug the controller wire into the port titled PCTV (Figure F).
FIGURE E
6) If the system is going to be wired plug the Net Wire from the TV Bracket kit into the Ethernet port in the back of the PCTV (Figure G). If the
system is wireless skip this step.
7) If the PCTV is wireless, plug the wireless dongle into the USB port on the back of the PCTV (Figure H) and use the double sided tape to se-
cure the dongle to the PCTV plastics (Figure I). If the system is wired, skip this step.
FIGURE H
FIGURE G
FIGURE F
FIGURE I
13