Table of Contents
Advertisement
Remote Port — Displays the Baud rate for the serial RS-232.
Contact Mute and Tally LED — Press the
closure mute mode. Press the
Contact Mute options:
•
— The initial contact closure provides input switching to the corresponding input.
None
Any additional button presses or contact closures on the input have no additional effect.
•
A/V Mute
unmutes audio and video on the output.
•
Sync Mute
unmutes audio and video sync on the output.
Tally LED options:
•
Always On
remains lit at all times.
•
Mute Off
off when video or sync is muted; otherwise, the LED remains lit.
•
Mute Blink
blinks when video or sync is muted; otherwise, the LED remains lit.
Device Info Submenu
Figure 20.
The
Device Info
input and output signal information, HDCP status, display information, and firmware version.
This submenu does not contain any adjustable submenu items.
and
Up
Down
— Once an input is selected, additional contact closure pulses mutes or
— Once an input is selected, additional contact closure pulses mutes or
— The LED on the corresponding tally output pin to the selected input
— The LED on the corresponding tally output pin to the selected input turns
— The LED on the corresponding tally output pin to the selected input
Device Info Submenu
submenu displays device information including internal temperature,
IN1604 DTP and IN1604 HD Scalers • Operation
and
buttons to select contact
Left
Right
buttons to select the tally LED action.
28
Advertisement
Chapters
Table of Contents
