Table of Contents
Advertisement
AV Controls Panel
The
Auto-Image to an input, video and audio mute, and image freeze. The panel also displays
input and output information.
Figure 39.
AV Inputs Buttons
Click an input button from the
selected, the
NOTE: The signal indicators on the AV input buttons display green when a signal is
Auto-Image Button
Click the
Freeze Button
Click the
Mute Buttons
•
•
•
•
To unmute any signal, click the appropriate button. The button reverts to the default color,
indicating the signal has been unmuted.
panel is used to control AV settings such as input selection, one-time
AV Controls
AV Controls Panel
AV Inputs
section displays information about the current input.
Active Input
present on the corresponding input or gray when there is no signal present.
button (
Auto-Image
2
button (
) to freeze the input. The button turns blue.
3
Freeze
Click the
button (
Audio Mute
when enabled.
Click the
button (
Video Mute
enabled.
Click the
button (
6
AV Mute
button turns red along with the
Click the
button (
Sync Mute
along with the
Video Mute
IN1604 DTP and IN1604 HD Scalers • Configuration Software
panel (
) to select an input. As a new input is
1
) to start a one-time Auto-Image on the selected input.
) to globally mute only the audio. The button turns red
4
) to mute only the video. The button turns red when
5
) to mute both the video and audio simultaneously. The
and
Video Mute
Audio Mute
) to mute the video and sync. The button turns red
7
button when enabled.
buttons when enabled.
59
Advertisement
Chapters
Table of Contents
