Device Info Panel - Extron electronics DTP2 T 204 User Manual

• Select the date from the calendar by doing either of the following:
•
•
2. To set the time, click the up and down arrow buttons for
each field to set the hours, minutes, seconds, and AM or
as desired.
3. Select the time zone from the Time Zone drop-down menu.
4. Click the Apply button. The dialog box closes.
To cancel pending changes:
Click the Cancel button. The dialog box closes.

Device Info Panel

The
Device Info
device with options to edit the device name and update firmware.
Device name
To edit the device name or hostname, click the Edit button in the Device Info panel. The
Device Name dialog box opens.
Figure 27.
To change the name:
1. In the Enter a device name field, enter the desired name.
2. Click the Apply button. The dialog box closes.
To reset the name to the factory default value:
1. Click the Reset to Default button.
2. Click the Apply button. The dialog box closes.
To cancel pending changes:
Click the Cancel button. The dialog box closes.
Click the left and right arrow buttons in the calendar header bar (see figure 26,
on the previous page).
2
Click the down arrow next to the calendar month
and year ( ) to display the date drop-down menu.
3
Click the desired month and year.
To display additional years, click the right and
left arrows at the top of the menu (see
illustration at right). Click the OK button to accept
the selected settings or the Cancel button to
cancel pending selections.
panel (see figure 23,
5
Device Name Dialog Box
in the
1
PM
on page 51) displays information about the
DTP2 T 204 Switcher • Internal Web Page 55