Operation; Front Panel Overview - Extron electronics IN1604 DT User Manual

Operation

This section contains information on the front panel operation, On-screen Display Menu
System, and reset modes of the scalers. Topics in this section include:
•
•
•
•
•
•
•
•
•

Front Panel Overview

A
Figure 10.
A
B
C
D
E
F
Front Panel Overview
Powering Up
Input Selection
Output Resolution Change
Auto-Image from the Front Panel
Front Panel Lockout (Executive Modes)
Power Save Mode
Firmware Reset
On-Screen Display (OSD) Menu System
Extron
CONFIG
B
Front Panel Features (IN1604 DTP Shown)
Power LED indicator — Lights green when the scaler is receiving power and an input
signal. Lights amber when it is receiving only power.
Config port — Connect a host device to the USB mini-B connector.
Input selection buttons and LED indicators — Press one of these buttons to select
an input. The buttons light when the input is selected.
HDCP status LED indicators — Light when the HDMI input or the output is
HDCP-compliant.
Menu and Enter buttons — Press this button to enter the OSD menu system, select
options, or exit the OSD menu system.
Navigation buttons — Press any of the four buttons to navigate the OSD menu
system or change values of adjustable settings.
HDCP
MENU
1 2
INPUT 2
INPUT 3
3 4
INPUT 4
OUTPUT
ENTER
C D E
IN1604 DTP and IN1604 HD Scalers • Operation
IN1604 DTP
AUTO-
IMAGE
HOLD FOR XGA/720p
F
13