Unit Information tab
The
tab displays basic information about the connected device.
Unit Information
Figure 34.
Unit Information Tab (IN1604 DTP Shown)
Click the
button (
1
Cancel
Reset Device
This option opens a dialog box to confirm the resetting of device settings.
From the
drop-down menu, select
Device
box opens.
Figure 35.
Reset Device Dialog Box
The reset changes all device settings to the factory defaults. It is the same as the
E
}
SIS command (see
ZXXX
To reset the connected device, click the
without making any changes, click the
IN1604 DTP and IN1604 HD Scalers • Configuration Software
) to close the dialog box.
Reset Device...
Reset SIS commands
button. To exit the
Reset
button.
Cancel
. The
dialog
Reset Device
on page 47).
dialog box
Reset Device
56