Audio Configuration Page - Extron electronics IN1604 DT User Manual

Audio Configuration Page

From the
Audio Config
Click the
Audio Config
to open this page.
Bar
Figure 52.
1. From the
input format. The audio input format specifies whether the audio input is analog, digital,
or not to be sent to the output.
NOTE: Analog Input gain adjustment applies only to analog signals. The Input
Gain fader is available only when the audio format is set to
LPCM-2Ch Auto (Analog 1)
(Analog 2)
For input 1, available formats include:
• None
• Analog 1
This option sets "No Audio" EDID.
• Analog 2
output. This option sets "No Audio" EDID.
For all other inputs, available formats include:
•
None
• Analog 1
sets "No Audio" EDID.
• Analog 2
sets "No Audio" EDID.
• LPCM-2Ch
option sets 2Ch audio EDID.
• Multi-Ch
multi-channel audio is not available, 2-channel LPCM audio is passed to the digital
outputs. This option sets Multi-Ch audio EDID.
page, audio inputs and outputs can be configured and mixed.
icon (see figure
Audio Configuration Page
drop-down menu (see figure 52,
Audio Format
,
Multi-Ch Auto (Analog 1)
, or
Multi-Ch Auto (Analog 2)
— Audio is not sent to the output. This option sets "No Audio" EDID.
— Analog audio from analog audio input 1 (TRS) is sent to the output.
— Analog audio from analog audio input 2 (captive screw) is sent to the
— Audio is not sent to the output. This option sets "No Audio" EDID.
— Analog audio from analog input 1 is sent to the output. This option
— Analog audio from analog input 2 is sent to the output. This option
— The digital input is configured to receive 2-channel LPCM audio. This
— The digital input is configured to receive multi-channel audio. If
IN1604 DTP and IN1604 HD Scalers • Configuration Software
40, on page 60) on the
5
), select the desired audio
1
Analog 1
.
Global Navigation
, ,
Analog 2
,
LPCM-2Ch Auto
70