Image Settings Page - Extron electronics IN1604 DT User Manual

Image Settings Page

From this page, signal sampling and picture control settings can be adjusted, user and input
presets can be saved and recalled, and overscan settings can be applied. Click the
Settings
the
Image Settings
Figure 46.
Signal Sampling panel
Signal sampling optimizes the input signal to the scaler for the currently selected input.
Figure 47.
To manually adjust signal sampling settings, enter a value within the Min and Max values
displayed to the right of each adjustable settings (see figure 47,
arrows. An asterisk beside a chosen value indicates that it is a default value.
To automatically adjust these settings, perform one of the following:
• Click the
Click the
•
the entire video output (ignores aspect ratio setting).
• Click the
maintain the aspect ratio of the input signal (ignores aspect ratio setting).
icon (see figure 40, on page 60) on the
3
page.
Image Settings Page
Signal Sampling Panel
button ( ) to perform a one-time Auto-Image.
2
Auto-Image
button (
Auto-Image & Fill
Auto-Image & Follow
IN1604 DTP and IN1604 HD Scalers • Configuration Software
Global Navigation Bar
1
) to perform a one-time Auto-Image and fill
3
button ( ) to perform a one-time Auto-Image and to
4
Image
to open
) or click the or
Up Down
65