Output Configuration Commands - Extron electronics IN1604 DT User Manual

Command

Output Configuration Commands

TMDS output format
Set format
View setting
View auto output format
Power Save mode
Power Save off
Power Save on
NOTE: It may take some time for DTP communication to resume after Power Save mode is turned off.
View setting
Screen saver
Set mode
View mode
Set time-out duration
View time-out duration
View screen saver status
NOTES:
X2@
= Output sync timeout
X2*
= Screen saver mode
X3$
= HDMI output format
X4@
= Power Save mode
X4#
= Screen saver status
ASCII Command Response
(host to scaler) (scaler to host)
E X3$ }
VTPO Vtpo
E } X3$]
VTPO
Vtpo
E } X3$]
1*VTPO
E }
0PSAV Psav0
E }
1PSAV Psav1
E } X4@]
PSAV
E X2* }
M SSAV SsavM
E } X2*]
MSSAV
SsavM
E X2@ }
T SSAV SsavT
E } X2@]
TSSAV
SsavT
E } X4#]
SSSAV
SsavS
IN1604 DTP and IN1604 HD Scalers • SIS Configuration and Control
Additional Description
X3$] Set the color space and format of the
X3$
output to
View the color space and format setting.
X3$]
Verbose mode 2 and 3
View the Auto output color space.
Operate at full power.
]
Operate in a low power state. There is
]
no video output or DTP communication.
View the Power Save mode.
X2*]
Set the color of the screen saver to
View the color of the screen saver.
X2*]
Verbose mode 2 and 3
X2@]
Set the time-out duration to
View the time-out duration.
X2@]
Verbose mode 2 and 3
View the screen saver status.
X4#]
Verbose mode 2 and 3
= OSD is never displayed, output sync is instantly
0
disabled with no active input
(in 1 second increments)
1-500
= output sync never times out
501
= black output (default)
1
= blue output
2
= auto (default)
0
= DVI RGB 444
1
= HDMI RGB "Full"
2
= HDMI RGB "Limited"
3
= HDMI YUV 444 "Full"
4
= HDMI YUV 444 "Limited"
5
= HDMI YUV 422 "Full"
6
= HDMI YUV 422 "Limited"
7
= full power mode (default)
0
= low power state
1
= active input detected, timer not running
0
= no active input, timer running, output sync enabled
1
= no active input, timer expired, output sync disabled
2
.
X2*
.
X2@
.
41