Extron electronics IN1604 DT User Manual page 80

Screen Saver panel
When no active video is detected on the selected input, the screen saver mode is activated.
The output sync can be disabled after a user-set duration, which allows display devices to
go into a low power, standby state.
Figure 55. Screen Saver Panel
1. Click one of the radio buttons to select a display when the screen saver is enabled.
— Mutes video output to black for a set duration before disabling output
• Black
sync (default).
• Blue with On Screen Display (OSD) Bug
a moving OSD message that indicates "<
" for a set duration before disabling the output sync.
Signal
2. Select a duration to display the screen saver before the output sync is disabled.
Select the
• Disable Sync After
a set duration without an active input. When selected, the
field becomes available.
In the field, enter a value in the field or click the
• Duration
specify a duration to wait before disabling output sync during inactivity. The default
is to never disable the output sync.
HDCP Notification panel
HDCP notification indicates when HDCP content restrictions prevent a video signal from
passing.
Figure 56. HDCP Notification Panel
Select one of the following radio buttons:
• — Displays a black or muted screen when an encrypted source is sent to a
Black
display that is not HDCP-compliant.
— Displays a green screen when an encrypted source is displayed on a sink that
•
Green
is not HDCP-compliant (default).
IN1604 DTP and IN1604 HD Scalers • Configuration Software
— Displays a blue background with
>
scaler model : Input
check box to disable the scaler output sync after
Duration On Screen
Up
< >
number No
and arrows to
Down
74