Device Info Panel - Extron electronics SW HD 4K PLUS Series User Manual

To obtain an IP address automatically:
1. Select the
2. Click the
To set a static IP address:
1. Ensure the
2. In the
3.
In the
4. In the
5. Click the
To reset all communication settings to the default values:
Click the
Reset to Default
• DHCP is disabled.
• The IP address is set to
The subnet mask is set to
•
• The default gateway is set to
To cancel pending changes:
Click the
Cancel

Device Info Panel

The
Device Info
about the device with options to edit the device name and update firmware.
Device name
To edit the device name or hostname, click the
Device Name
Figure 20.
To change the name:
1.
In the
2. Click the
To reset the name to the factory default value:
1. Click the
2. Click the
To cancel pending changes:
Click the
Cancel
checkbox (see figure 19,
Use DHCP
button. The dialog box closes.
Apply
checkbox is not selected.
Use DHCP
field, enter an IP address.
IP Address
field, enter the subnet mask if required.
Subnet Mask
field, enter the default gateway if required.
Default Gateway
button. The dialog box closes.
Apply
button. The following settings are set:
192.168.254.254
255.255.0.0
0.0.0.0
button. The dialog box closes.
panel (see figure 18,
dialog box opens.
Device Name Dialog Box
field, enter the desired name.
Name
button. The dialog box closes.
Apply
button.
Reset to Default
button. The dialog box closes.
Apply
button. The dialog box closes.
, on the previous page).
1
.
.
.
, on the previous page) displays information
2
button in the
Edit Device Info
SW HD 4K PLUS Series • Internal Web Page
panel. The
34