Extron electronics IN1604 DT User Manual page 68

Output Configuration panel
The
Output Configuration
settings, switch transitions, and available test pattern selections.
Figure 43. Output Configuration
To configure the output, perform the following:
1.
From the
Resolution
2. From the
Refresh Rate
3. From the drop-down menu (
HDMI
4. In the
Switch Transitions
• Fade Through Black
newly selected video.
— Switches video directly to the newly selected input.
• Cut
5. To aid display device setup and optimization, select a test pattern from the drop-down
menu ( ) in the
5 Test Patterns
Crop
Grayscale
Figure 44. Available Test Patterns
NOTE: No input signal is needed when using a test pattern for display device setup.
IN1604 DTP and IN1604 HD Scalers • Configuration Software
panel contains controls for output resolution and rate, format
drop-down menu ( ), select the desired output resolution.
1
drop-down menu ( ), select the desired refresh rate.
2
), select the desired output format.
3
panel ( ), select one of the following radio buttons:
4
— Fades video to a black screen before switching to the
panel.
Alternating Pixels
Blue Mode
Crosshatch Color Bars
Audio Test
62