Cover Open Interlock Switch (Pl 9.2.1.16) - Xerox Phaser 3425 Service Manual

3.
Remove the 6 screws that secure the Front Panel Assembly to the Top Cover and
remove the Front Panel Assembly.

Cover Open Interlock Switch (PL 9.2.1.16)

Note
It is not mandatory to remove the Top Cover to access the interlock switch,
however the Right Cover must be removed in order to disconnect the
interlock switch connector CN 2 from the Cover Interconnect Board.
Routing the switch cable to the Main Board is easier with the Top Cover
removed.
1.
Remove the Print Cartridge (page 8-4) and protect it from light.
2.
Remove the Top Cover Assembly (page 8-9).
3.
Open the front section of the Top Cover to access the Interlock Switch cover.
8-16
Button Panel
1.
1
LCD Panel
2.
Phaser 3425 Laser Printer Service Manual
2
-