IBM x3250 M3 Problem Determination And Service Manual page 218

v User Security
v Save Settings
v Restore Settings
v Load Default Settings
v Exit Setup
200
IBM System x3250 M3 Types 4251, 4252, and 4261: Problem Determination and Service Guide
– POST Event Viewer
Select this choice to enter the POST event viewer to view the POST event
log.
– System Event Log
Select this choice to view the system-event log.
– Clear System Event Log
Select this choice to clear the system-event log.
Select this choice to set or clear passwords. See "Passwords" on page 201 for
more information.
This choice is on the full and limited Setup utility menu.
– Power-on Password
Select this choice to set a power-on password. See "Power-on password" on
page 201 for more information.
– Administrator Password
Select this choice to set an administrator password. An administrator
password is intended to be used by a system administrator; it limits access to
the full Setup utility menu. If an administrator password is set, the full Setup
utility menu is available only if you type the administrator password at the
password prompt. For more information, see "Administrator password" on
page 202.
If you forget the administrator password, you cannot reset the
Attention:
password. You must replace the system board.
Select this choice to save the changes that you have made in the settings.
Select this choice to cancel the changes that you have made in the settings and
restore the previous settings.
Select this choice to cancel the changes that you have made in the settings and
restore the factory settings.
Select this choice to exit from the Setup utility. If you have not saved the
changes that you have made in the settings, you are asked whether you want to
save the changes or exit without saving them.