Menu - RGBlink VSP 198CVS User Manual

4. Hardware Installation
Menu Orientation
BOOT TIMES: Boot times.
TIMING CONTROL: Timing control switch.
CHANGE DATE.
CHANGE TIME.
LOCK FRONT PANEL: Through this setting can choose whether to lock
the front panel operation, if the front panel operation is locked, the menu
will shows: "please push MENU and SEL buttons together to release lock
mode!" User can push two buttons together to unlock the equipment.
LICENSE SETUP: The device will not work if excess the prescribed time,
there are no signal output, it needs to input password and modify the using
time to continue to work.
CAN USE TIME: Display the rest of the working time as LICENSE SETUP.
OLED LUMINANCE：adjust OLED panel luminance，set the range 0-15 ;
MENU --- LANGUAGE
Through this option, user can choose Chinese or English according to their
needs to operate the interface more quickly.
MENU---LOCK FRONT PANEL
Enter can set whether lock front panel; If open it, operating other buttons
are invalid; release it, shall also press < Menu > and press 3S key to
unlock! This function mainly in order to prevent the user misoperation.
MENU --- FACTORY RESET
Enter FACTORY RESET to reset; choose YES and push the knob to
confirm; then VSP 198CVS is reset to its factory settings. After 5 seconds, it
completes factory settings and is ready for more operations.
VSP 198CVS
Note
If use timing function, DTAT and TIME need to
set up accurate.
User Manual 48