RGBlink VSP 198CVS User Manual page 78

5. Communication Software Guideline
How to Connect Upper Monitor by RS232 Interface?
Check and tap【Serial】 ，Serial Port , for example, is COM6 which is
checked from device manager. Set VSP 198CVS Boud Rate to
be :115200，Click【Confirm】after setting.
Click
corner，when there is the prompt green
the software, it means the communication is ok , and you can use the
software to control the device now.
Note
If power off during communication, should close
the por
VSP 198CVS
【open serial】 ，check if 【COM】icon is on the bottom right
, by first, and plug in out of the USB
t
and do communication.
User Manual
showing on
78